Design notes for forest fire thermal monitoring, covering detector resolution, lens focal length, mounting height, scan cycles and false-alarm control.
The goal of the forest fire protection system is to detect small area fires as early as possible. Thermal imaging detection distance is related to the detector pixel, lens focal length and target size. You cannot just look at the manufacturer's distance name.
Detection distance
Stable recognition can only be achieved when the target occupies enough pixels on the detector. A 1-meter-square fire point requires a longer focal length lens at a distance of 5 kilometers; actual projects often configure large-scale scanning and close-range confirmation separately.
Install and scan
The commanding heights should have a clear view of the main forest areas, and the scanning route should cover areas with high fire risk. The scanning cycle is related to the pan/tilt speed and field of view. The fire prevention period can shorten the cycle and increase the stay in key areas.
False alarm control
False alarms can be triggered by solar reflections, vehicle exhaust, industrial heat sources and cloud cover. False alarms can be reduced through temperature thresholds, target area, duration and visible light screen review, and shielding areas can be set.
Linkage
After an abnormality is discovered in thermal imaging, the nearby automatic tracking dome camera is linked to zoom to confirm, and the video and alarm are uploaded at the same time. All thresholds and masking areas should be documented.
