How gyro modules, mechanical damping and image stabilization work together, and which parameters to confirm for vehicle and vessel projects.
Vehicle movement and ship hull swaying will cause the telephoto image to continue to shake. The gyro-stabilized turntable measures attitude changes through sensors and drives the gimbal to perform reverse compensation to keep the lens pointed.
Stable link
The gyroscope measures the angular velocity, the controller calculates the compensation, and the motor performs the reverse motion. The mechanical vibration reduction structure absorbs high-frequency vibrations, and image anti-shake handles the remaining small shakes.
Key parameters
Pay attention to stability accuracy, maximum compensation angular velocity, gimbal rotation range and load capacity. The higher the lens magnification, the higher the requirements for stable accuracy.
Installation
The turntable is rigidly connected to the car body or ship hull, and the shock absorber is selected according to the weight of the equipment; a margin of movement is reserved for the cable to avoid pulling. After installation, perform static drift and dynamic following tests.
Usage suggestions
During telephoto observation, first stabilize and then zoom; for ship projects, pay attention to salt spray protection and grounding; for vehicle projects, confirm the power supply voltage and ignition control method.
